PATENT PENDING
DIGITAL FOCUS CONTROL
The B-190TBPL+ features a revolutionary focusing system based on a unique digital control unit. There is a single adjustment knob located on the left side of the instrument.
The knob controls the focus, which has three different resolutions:
– Macro, 250 mm per step (7500 mm per turn of the knob)
– Semi-Micro, 8 mm per step (240 mm per turn of the knob)
– Micro, 1 mm per step (30 mm per turn of the knob)
Selection of the three resolutions is done simply by pressing the knob itself. Repeated operations cycle the focus type in the following order:
Macro → Semi-Micro → Micro, then Macro again, and so on. Three specific LEDs located on the front of the instrument light up according to the selected resolution.
PATENT PENDING
STAGE RETRACTION SYSTEM – ONE TOUCH MEMORY FUNCTIONS
This revolutionary system memorizes the last focus point to facilitate and speed up routine operations that normally cost the operator time and effort:
1. Easy operation of spreading immersion oil
The last focus point (stage height) is automatically memorized by the digital processing unit. This function is very useful when using oil immersion objectives. The procedure is very simple and allows you to switch from the 40x to the 100x objective with an ease never achieved before:
– focus the 40x objective. Its focus point is automatically memorized by the system;
– press the focus knob for 2 seconds; the stage reaches its lowest position, allowing you to easily put a drop of oil on the sample;
– put a drop of oil on the sample and switch from the 40x to the 100x objective;
– press the dedicated button again; the stage rises to the memorized focus position;
– adjust the micrometric focus.
2. Ergonomic slide change operation
By following the above-mentioned procedure, you can save a lot of time when changing slides:
– focus the objective. Its focus point is automatically memorized by the system;
– press the dedicated button located on the microscope body; the stage reaches its lower position, allowing you to easily change the sample;
– change slide;
– press the dedicated button once again; the stage rises to the memorized focus position;
– adjust the micrometric focus.
- Eyepiece H5x M-001
- Eyepiece WF 10x/18 mm M-002.1
- Eyepiece WF 16x/12 mm M-003
- Eyepiece with micrometer WF 10x/18 mm, 10 mm/100 ųm M-004
- Eyepiece with pointer WF 10x/18 mm M-008
- Objective N-PLAN 4x/0.10 M-164
- Objective N-PLAN 10x/0.25 M-165
- Objective N-PLAN 20x/0.40 M-166
- Objective N-PLAN 40x/0.65 M-167
- Objective N-PLAN 60x/0.80 M-168
- Objective N-PLAN 100x/1.25 (oil). M-169
- Polarizing filter (filters only) M-190
- Plastic dust cover, medium DC-002
- Solar panel battery kit M-069
- Blue filter, diameter 32 mm M-974
- Green filter, diameter 32 mm M-976
- Yellow filter, diameter 32 mm M-978
- Ground glass filter, diameter 32 mm M-988
- Plane-concave mirror with base M-971
- C-mount adapter for 1/2” sensors M-114
- C-mount adapter for 1/3” sensors M-115
- C-mount adapter for 2/3” sensors M-116
- Photo adapter for APS-C and full frame SLR cameras M-173
- OPTIKA immersion oil 10 ml 15008
- Micrometer slide for software calibration, 1 mm/10 um, 10 mm/100 um M-005
- Cleaning Kit 15104
- IQ/OQ/PQ Validation Protocol VP-190
